Mr-coffee ECM9 User Manual download pdf (Page 3)

SPECIAL CORD SET INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting from becoming

entangled in or tripping over a longer cord.

An extension cord may be purchased and used if care is exercised in its use.

If an extension cord is used, the marked electrical rating of the extension cord must

be at least 10 amps and 120 volts. The resulting extended cord must be arranged

so that it will not drape over the counter top or table top where it can be pulled on by

children or tripped over accidentally.

This appliance has a polarized plug (one blade is wider than the other).

reduce the risk of electric shock, this plug

will

fit

in a polarized outlet only one

way.

the plug does not

fit

fully in the outbt, reverse the plug.

it still does not

fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

CAUTION: PRESSURE

In order to avoid

possible

burns to

body

parts

and/or

other Injury from hot

steam and water NEVER open the

boiler

cap

while

your Mr. Coffee Steam

Espresso/Cappuccino

Maker

is turned on or as long as there is pressure In

the water tank.

In order to check

the machine is under pressure, proceed as follows:

Turn

the selector control knob to OFF, and unplug the machine.

Rotate the selector control knob to the “steam” position. If steam comes out

of the frothing tube, then the water tank is still under pressure.

Turn

the

selector control knob to OFF.

To release the pressure, hold a pitcher with water under the frothing tube

and immerse the frothing aid in the water.

Slowly

Q.Q

S.&&C

control

k!uhfna!!i!‘steam”oositiondreleasetisteam.

When the frothing tube stops releasing steam, the boiler cap can be

removed.

Turn

the selector control knob back to the OFF position.

Do not remove the

filter

holder

at any time during the brewing process

or until pressure is relieved.

Use caution when removing the filter

holder

from the brew head. The

metal parts may still he very hot. Also, there may be hot water floating

on the top of the filter

basket

If the filter hdder is blocked, allow the machine to cool down, then release

the

steam with the instructions above. The blockage may be caused by too

finely ground

coffee. See “Problems and Causes”

on page 11.

WHEN CLEANING THE FROTHING NOZZLE:

Place

frothing pitcher or

large cup (with at least an 11 ounce capacity) half full of water under the

frothing aid.

Make sure the

tip

of the frothing tube is

submerged

in liquid

before

turning the selector control knob to the “steam”

position

1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments

Mr-coffee ECM9 User Manual Page 3

Comments to this Manuals

Related products and manuals for Coffee machines Mr-coffee ECM9